FAQ

• VC 1000 pump 15-25 cfm.
• VC 2000 pump 35-50 cfm.
• VC 3000 pump 55-70 cfm.

1. Smooth and stable product flow ensuring the clean production environment by avoiding spills.
2. Compact design that doesn’t take up more space
3. Easy to install
4. Quick changeover of product to product
5. Assures human safety possible to convey material that is hazardous to inhale.
6. Hygienic, Food grade hose material.
7. Can be even used safety in explosive zones.

Yes, best suitable for food and pharma industry, as it is made up of FDA certified food grade materials, and very easy to clean.

4 to 5 weeks once after receiving confirmed purchase order with 30% advance.

Yes best suitable. Please Refer our vacFLOW™T series conveyor.

No, it will not convey based on weight. It is batch type conveying process. Based on levels sensor it can fill and refill the material. Weighing is not possible

No, not suitable for liquid transfer. Please refer RDP- Liquid transfer in our product range for the same.

Yes, Unijet provide the related documents when it is necessary

Yes, we have 2 type of controller. Pneumatic operated and electrical operated. For electrical operated we required electrical supply. Based on the requirement it can be provided.

Warranty claims applicable only for manufacturing defects. It is not applicable for any electro controller or bought out items.

Capacity of the conveyor designed based on client requirement. In standard we have 3 models, VC1000, VC2000,VC3000-for 1,2 and 3 Ton/ hr respectively based on 800 kg/m3 Bulk Density materials with 3 meter vertical and 3 meter horizontal and moisture content less than 5%.

Any free flowing powder with moisture content less than 10% and bulk density varies from 300 kg/3 to 1300 kg/m3 can be convey/ transfer.

With regular maintenance, the unit will do the job for years to come. If the compressed air is dirty/has fluid in it, the filter can be clogged as well as the pump and the timers. Water in the air line is not optimal. Regular maintenance of the filter as per manual sheet is mandatory.

Continuous flow is possible by provide rotary airlock valves.

Pls refer our GA drawings for the same.

As we are the manufacturer it is always readily available with us, which can be couriered on same day or one

Based on the nature of the material, this will be decided and same will be informed during supply and updated in manual too. So please go through the maintenance manual accordingly.

Based on the nature of material, there may be a breakage. But unijet try to eliminate the maximum and supply the product based on sample given.

For a capacity of within 5 ton/ hr can use this product. Also whoever is concern about Quality, safety, hygienic, productivity and to increase efficiency in transferring the powder can use this product.

• VacFLOW™ P & VacFLOW™ T series made up of SS 316 or SS 316L
• VacFLOW™ F , VacFLOW™ CP & VacFLOW™ C are made up of SS 304

Within 24 hrs, either through Team viewer or if nearby will visit directly.

A coolant sump cleaner, sometimes called a cnc sump cleaner is a machine used for cleaning the coolant sumps of machine tools. The sump usually consists of coolant and solids. The solids consist of metal chips and swarf based on machining components. In just a few minutes, a coolant sump cleaner will pick up everything in the sump – fluid as well as solids. The filter separates the solids from the fluid. Filtered coolant is returned to the machine tool sump or transported for additional processing.

a) If for example, the sump capacity is 250 litres, the metal chip and swarf occupies more than 40%. If this continues, proper coolant will not flow through machine, which will generate heat in running tool, which will cause wear and tear of the insert . b) Metal chips in the coolant can mar the work piece. c) Chips and fines in sumps cause microbial growth leading to stinky coolant and dermatitis. d) Excessive solids can cause increased fluid temperature

The machine hour rate and man hour rates are increasing drastically. If we clean the machine by using manual method, the time taken will be nearly 4-5 hours. But the same can be achieved through machine within an hour time, which saves 4 hours of both machine and man hour rate. For better calculation, pls try ROI calculation sheet.

As machine coolant is applied during machining operations, it removes heat by carrying it away from the cutting tool / work piece interface. This cooling effect prevents tools from exceeding their critical temperature range beyond which the tool softens and wears rapidly. Machine coolants also lubricate the cutting tool/work piece interface, minimizing the amount of heat generated by friction. A machine coolant's cooling and lubrication properties are critical in decreasing tool wear and extending tool life. Cooling and lubrication are also important in achieving the desired size, finish and shape of the work piece.

Pls refer ROI SHEET.

1. 2 set of filter cloth

As the coolant does not pass through the pump, the life of the pump comes for years, if the input Air given is free from Dust/Water.

5.5 bar –Normal working pressure of the compressed air.

1. Easy cleaning 2. Reduce down time 3. Pneumatically operated –No need to search for Electrical connection 4. One turn knob for suction and delivery. 5. Coolant Gun for cleaning the tank for perfect clean 6. Lifting of scarp from filter area is very easy.

This is liquid transfer pump, which uses pneumatic air as its input. By single turn off knob, it is used to fill or refill the barrel just in 2 minutes 250litre water.

Pls refer the working principle in related web page

It is commonly used in all industries, wherever we need to transfer any type of liquid from barrel or into barrel. Any water based coolant, oil etc. Based on viscosity of the material, the transfer rate varies.

No , the vacuum level is maintained to ---- and the pump has inbuilt safety relief valve, which will not allow the barrel to over pressurise.

No, this is only to transfer the liquid, no dosing or measuring is possible.

No the flow cannot be stopped immedietly.As the liquid flow is through pressuriaration of the liquid, immediate stop is not possible.

It can lift the liquid upto 3 meter(ie 9 feet)

No defined capacity, based on your size of the barrel it can transfer.

No, it requires closed barrel with ¾” and 2” thread option.

No, only for liquid transfer, But at the same if the parts convey through liquid it can lift.

No, we have a different product for plastic barrel.