REVERSIBLE DRUM PUMP

Empty or Fill a 210 liter drum within 2 minutes!
Two way Pump.

Unijet Air Operated reversible drum pump attaches quickly to any closed head of a drum. Its high powered vacuum fills the drum within two minutes. It uses compressed air for a powerful efficient venturi action to create vacuum as well as pump the fluid back to tank. Unijet reversible drum pump is an inexpensive way to fill and refill the drum. The flow rate can be controlled either by a shut-off valve or regulator. Drum should have a nominal wall thickness of 1.5mm (16 gauge) and in good condition to maintain integrity of system performance and safety. Using no electricity, these systems last for years unlike many electrical units that wear out quickly in harsh industrial environments. A built in safety feature prevents overfilling and spills.

Unijet Reversible drum Pump is a plant maintenance cleaning tool for quick pump in and pump out of
  • Coolant 
  • Waste water
  • Tramp oil
  • Hydraulic oils
  • Liquid transfers
  • Liquid spills
Sump cleaner.jpg
REVERSIBLE DRUM PUMP FEATURES:
  • No moving parts
  • Driven by air not electricity
  • Built in pressure relief which limits internal drum pressure to 0.5 bar(g)
  • Compact and portable - easy to install
  • Auto system shutoff to prevent overfill
  • Fits standard closed head drum
  • System is complete with spill recovery system
REVERSIBLE DRUM PUMP BENEFITS:
  • Maintenance Free
  • Safe - No Electricity and pressure relief
  • Long life
  • Simple to install and use - portable
  • Easy to operate and control the output.
  • Cannot over fill
  • Usable on any standard drum
 100_0418_upload1.jpg

The Drum pump uses only 145 NLPM at 5.5 bar (80 PSIG) and can remove water at 100 Liters per
minute. Standard inlet is 1/4" BSP.

Reversible Drum Pump
Reversible Drum Pump : Compressed air enters at point (A) and into the Drum Pump unit (B) which is mounted onto a sealed metal drum through the small hole. An adjustable knob (C) is used to create vacuum or pressure inside the drum to fill or empty the drum. The liquid enters into the drum through a tube assembly (D) inserted and threaded into the large drum hole. An elbow attachment (E) connects the tube assembly to the hose and attachment assembly (F) which collects or dispels the liquid.  How-it-works.jpg